TWO-STROKE TUESDAY : YZ250 OFF-ROAD PROJECT

728X90_7

On this weeks Two-Stroke Tuesday brought to you by Boyesen we take a look at our off-road Yamaha YZ250 build. This machine graced the cover of DB when it was completed. We show you a few items from Hardline, Cylinder Works and Seat Concepts that get your premix flowing. You don’t want to miss this weeks Two-Stroke Theater featuring 3 sweet project bikes and one very rare TM300. Yamaha YZ250 faithful be sure to click the image at the bottom for more eye candy !

ProjYZ250rightweb-2

This bike looks fast just sitting on the stand! Magik did a great job on the graphics while Faster USA added strength and style with their wheel set featuring Excel black rims.

ProjYZ250lengweb

Internally the engine was left relatively stock but we did add a V-Force reed cage and FMF pipe for some performance increases.

ProjYZ250fwheelweb

EBC makes one of the largest oversized front rotor kits on the market at 280mm and it adds tons of stopping power.

ProjYZ250rengweb

The Rekluse auto-clutch virtually eliminates stalling on the trail and a Boyesen Supercooler helps keep the machine cool.

ProjYZ250sprocweb

Sunstars Works-Z steel sprocket looks like something out of Mad Max and is tough as nails just like the TM Designs rear chain guide.

ProjYZ250leftweb

MX Dream Bikes did all the grunt work making this build possible.

ProjYZ250GPRweb

Just a few off-road necessities IMS tank, GPR Stabilizer, ODI lock-on grips, ARC folding levers and Acerbis X-Factor wrap around hand guards.

ProjYZ250actionweb

Here is that cover shot we spoke about earlier.

728X90_7

TWO-STROKE HARDWARE :

Fender_Bench

The FenderBench work tray is designed to fit over the rear fender of any dirt bike and provide you a place to set tools, fasteners, nuts & bolts, seals, lubricants and easy to loose parts while working on your bike.

FenderBench is securely latched to the fender so it won’t spill with an easy to use 1 ½” velcro strap.

The FenderBench has separated departments for specific parts organization and is made from rugged injection molded plastic for easy clean up.

  • 10″ x 14″ Injection molded tray specifically designed for dirtbike fenders
  • Fits on any dirtbike fender
  • Mounts securely with flexible Velcro strap
  • Holds T-Handles, screwdrivers and other tools
  • Made with fade, fuel resistant plastic
  • Separated bins inside to keep parts organized
  • Lightweight with convenient handle
  • Use at the track or in the garage
  • UPC: 632194723474

Price : $29.99

Contact : www.hardlineproducts.com

NewProducts_CylinderWorks

Complete heads from Cylinder Works for standard bore YZ250 two-strokes . Fits 1999 – 2017 models.

Price : $ 199.99

Contact : www.cylinder-works.com

285078647

The Seat Concepts Super Grip cover incorporates an industry leading rubber grip patch at the lower center of the cover. This means you can hold the bike with your knees and have better control. A great attribute of this design is resistance to damage caused by knee braces. Our ribs have a foam insert to improve resistance to sliding on hard acceleration or braking.

Note:
When ordering a foam and cover kit you will need to look at the bottom of your seat and select the correct kit. There is one with a pocket and one without. There are pictures attached to use as a reference. 

This fits:
2015 Factory Edition
2016 SX/XCF

Available as just a cover, foam and cover kit or complete seat.

Contact : www.seatconcepts.com

728X90_7

TWO-STROKE THEATER :

728X90_7

Want to see more YZ250 builds ? CLICK THE IMAGE BELOW to see our Dubach Racing / MX Dream Bikes build from a couple years ago.

DRDYZ250FlatRight

Comments are closed.