THE WEEKLY FEED: CAN-AM BACK IN THE DAY, VIDEO AND SOCIAL HIGHS

CAPTURED

In 1975 Greg Robertson was a dominant force in the Indian Dunes, Valley Cycle Park racing zones. Piloting a Can-Am for Kolbe Cycles, Greg was one of the few racers who could beat Bob Hannah and his Suzuki RM250 at Valley Cycle Park. And Greg did it religiously on his Can Am. This shot is from Indian Dunes during one of their infamous Grand Prix events. Thank you Mark Kiel for shot.

 

NEWS

 

Ricky Brabec wins the final stage and  podiums in the Morocco Rally

American Ricky Brabec wrapped up the Morocco Rally winning the final stage. The rider from the Monster Energy Honda Team also secured a final place on the rally’s podium as the FIM Cross-Country Rallies World Championship season concludes. Brabec finishes the campaign in fifth overall position. Red Bull KTM riders Toby Price and Matthias Walkner finished 1-2 at the  Rally.

 

DONNER SKI RANCH HARE SCRAMBLES THIS WEEKEND

 

THE TURKEY RUN

JCR’S TREVOR STEWART WINS VIEWFINDER’S BIG SIX GP

Thank you to the Viewfinders MC who put on a great Grand Prix. The racers were treated to an overnight rain shower that left course conditions epic for Sunday’s AMA BIG 6 WCGP pro race. Lap times were approximately 11 min 40 sec for a race that lasted just over 1 and a half hours. The course was fast and twisty, with sand and hardpack mix, including traditional GP features such as paved sections, MX jumps, desert whoops and sandy berms. JCR/Honda’s Trevor Stewart dominated the field, rounding the first corner in third place he outpowered the field on his Gage Day prepped CRF450RX. Trevor, managed the entire 1.5hr plus, winning by a 25-sec margin.

 

VIDEO JUKEBOX

 

THIS IS HYSTERICAL!! WATCH IT, YOU WON’T REGRET IT!

 

 

 

View this post on Instagram

 

Head to Head race against the always exciting @austinteyler who showed up on the Alta. @motoclimbsuperseries

A post shared by Kyle Redmond (@kyleredmond777) on

SOCIAL DISTORTION

 

 

 

 

 

GEAR BAG

 

MOOSE RACING  MX1 HUBS

Moose racing introduces the new MX1 Hub. The MX1 Hubs are compatible with MX1 spokes, OEM spokes, Moose rims and OEM rims. These hubs are available in multiple color options to match your bike. These one-piece hubs are designed to match with stock or aftermarket sprockets and rotors. They come with larger bearings for improved hub strength and longer life. The captive wheel spacer allows for quick and easy changes.  MX1 hubs are forged, then machined 6061- T6 aluminum, making them much stronger than stock cast or billet hubs. Available in 7 OEM colors & MSRP listed at $185.95.

www.mooseracing.com 

 

WORKS CONNECTION KTM / HUSQVARNA ELITE AXLE BLOCK KIT

Consisting of a pair of CNC’d Elite axle blocks, a titanium drive-side receiver and a square removal tool nut, the Elite Axle Block Kit converts your stock KTM / Husqvarna rear axle from a fixed design into a floating type. KTM and Husqvarna Factory teams use this same floating type design on their race team bikes to improve traction as well as straight line stability and now those same benefits are available from this kit. Another key component is the integrated receiver post on each axle block that allows the use of a caliper to precisely measure and match the left and right axle block’s position. This assures exact alignment of the chain and sprocket so critical to prolonging chain and sprocket life. Ultra-slim design, simple installation and offered in five vibrant color choices: Blue, Red, Black, Orange and Silver. Designed and manufactured in the USA. Price: $89.95                                              www.worksconnection.com
SLAVENS RACING NON-ADJUSTABLE SLAVE CYLINDER FOR HQV 450/501
The Rekluse Non-Adjustable Slave Cylinder for Husqvarna 450/501 is a direct replacement for the O.E.M. unit that often prematurely fails. Machined from billet aluminum Made in the U.S.A. Fits: ’16 FX/FC450, ’17-’19 FC/FX/FE450/501 $159.00

https://slavensracing.com

 

 

BULLET PROOF DESIGNS BETA LKINKAGE GUARD

Price: $90.00
Contact: (816) 695-3784

Website: www.bulletproofdesigns.com

Text:

 

Bullet Proof Designs linkage guard for Beta machines is made from 6061-T6 Billet Aluminum and encloses the low hanging linkage. With the install being only a matter of minutes paired with the strong protection, accompanied by minimal weight gains.  Order you Beta Linkage Guard directly from Beta USA at www.betausa.com

 

FASTER USA WHEELS

Pricing on these sets run $1079 Did STX rims, Excel spokes and nipples, FasterUSA hubs come fully assembled. Ship within 1-2 days (free freight to lower 48) Hubs are 100% US made in house.

http://www.fasterusa.com/ecommerce/

 

WOLF: BACK IN THE DAY

The Nevada Rally, 1994. While I’ve never been totally comfortable racing the desert at speed, this event was a bucket list race for me. Bruce Ogilvie set up a full factory machine, a mechanic and support and I remember super long days with high mileage at speeds which scare an enduro guy. Bruce told me that I could keep that bike pinned in top gear for long periods of time, and I remember laying on the tank, flat out across a Nevada two-track road for miles. The Honda XR625 was superb in this format and covering 400-500 miles a day was intense.
You might also like More from author

Comments are closed.

Follow Us @dirtbikemag

ENTER NOW