TWO STROKE TUESDAY

On this week's Two-Stroke Tuesday we look at a 2004 Suzuki RM250 that was built by Nic Wright at Decal Works MX. Nic is one of those people in the industry that works behind the scenes designing graphics for all the project bikes you see on…
Read More...

On this week's Two-Stroke Tuesday we get up close and personal with an Ohlins Yamaha YZ360 build done by friend of the magazine Dallas Nyblod. This thing is sweet and hasn't seen dirt since the complete restoration! Below are some words…
Read More...

Last week we showed you a behind the scenes look at out CR250 project with Faster USA. This week we are going to give you another behinds the scenes look at a two-stroke we are building with Jonny Weisman at The Ride Shop in Arizona. Billet…
Read More...

On this week's Two-Stroke Tuesday we give you a behind the scenes look at our 2002 CR250R project with the crew at Faster USA going on right now. Most of the major work is done and now all the pieces of the puzzle can start going back…
Read More...

On this week's Two-Stroke Tuesday we give you some inside information on the brand new 2020 TM Racing USA TPI Fuel Injected 300cc 2-Stroke directly from the US imported. It has more horsepower than the carbureted model and loads more…
Read More...

On this week's Two-Stroke Tuesday we take a closer look at the 2020 KTM 150XC-W TPI (transfer port injection) model and give you a brief impression of our first ride on this all new machine. Don't worry we still have 2-Stroke Theater packed…
Read More...

We are throwing things back to 2012 on this week's Two-Stroke Tuesday. The Yamaha YZ85 featured this week was part of a story called "Three Amigos" where we built a YZ85, YZ125 and YZ250. This YZ85 was raced by Justin Hoeft who at the time…
Read More...

On this week's Two-Stroke Tuesday we are in Idaho to give you the first look at our 1996 KX250 2-Stroke that we teamed up with Pete Treadwell from WPS/Fly Racing and Moto One Of Boise to build. We gotta thank the entire staff at Western…
Read More...

On this week's Two-Stroke Tuesday we are doing something a little different. Usually we show you projects we have done or are in the process of doing but we came across this Honda CR500 powered flat tracker built by the Deus Customs crew…
Read More...

On this week's Two-Stroke Tuesday we take a look back at a 2013 Yamaha YZ144 project built as part of a three bike story. This thing was a blast to ride and at the time turned a lot of heads. We have products from Nihilo Concepts and…
Read More...

On this week's Two-Stroke Tuesday we give you a behind the scenes look at John Croley's restoration of a 1984 Suzuki RM250 in his own words. This rebuild features an OEM Suzuki parts find that will blow your mind. As always 2-Stroke Theater…
Read More...

On this week's Two-Stroke Tuesday we take a look at the 2005 KX250 that Precision Concepts helped Blayne Thompson build to race the Wiseco 2-Stroke World Championship held at Glen Helen in San Bernardino California. As always 2-Stroke…
Read More...

On this week's Two-Stroke Tuesday we give you an exclusive look at a very clean Jeremy McGrath Bud Light KTM250SX tribute bike build put together by KTM street stunt rider Clint Ewing. We have four premix burning machines featured in…
Read More...

On this week's Two-Stroke Tuesday we give you an exclusive first look at Cody Webb's 2020 factory KTM 300 TPI race machine. We have products from Risk Racing and Boyesen featured in the 2-Stroke Hardware section and 2-Stroke Theater has a…
Read More...

On this week's Two-Stroke Tuesday we have something for all the little rippers to drool over. Our Red Label Yamaha YZ85 project was a lot of work but worth it. Products from Worx and Seal Saver are featured in 2-Stroke Hardware and 2-Stroke…
Read More...

We have gone 500cc crazy on this week's Two-Stroke Tuesday ! We are giving you an exclusive look at six insane 500cc two-stroke builds that we have done recently in two different types of features on our website. Our "Behind The Build"…
Read More...

On this week's Two-Stroke Tuesday we are giving you the first look at our TM250 build that was just completed. We have products from Vee Moto Tires and IMS featured in the 2-Stroke Hardware section and 2-Stroke Theater as always is packed…
Read More...

On this week's Two-Stroke Tuesday we give you an exclusive first look at our 2019 Yamaha YZ250 project build for Mike Brown. We have products from Dubya USA and Seal Savers featured in the 2-Stroke Hardware section and 2-Stroke theater is…
Read More...

This week, we give you an exclusive look at a 2006 Honda CR250R built by the SLR Honda off-road team for Ricky Dietrich to race at this year's Two-Stroke World Championship on this week's Two-Stroke Tuesday. There are products from Risk…
Read More...

On this week's Two-Stroke Tuesday we give you an exclusive look at Zach Bell's Precision Concepts /Chaparral Kawasaki KX250 built by Factory Phil. Zach will be racing this machine at Glen Helen this weekend defending his Two-Stroke World…
Read More...