Product test

PRODUCT: The new Ride Engineering split triple clamps have been designed to meet four goals: First is to optimize body position. These clamps allow for optional bar position, as well as optional offset bases for the bar mounts. The second…
Read More...

PRODUCT: The Ares rear rotor disc guard is unique in the three-piece design, where it replaces the standard chain block, uses the strength of the swingarm to help absorb impacts and offers a two-year warranty. It’s made for 6061 aluminum,…
Read More...

PRODUCT: The Tugger lift strap provides a convenient gripping point near the front or rear of your dirt bike. Most dirt bikes don’t have a place to grab that won’t toast your fingers or get your gloves all muddy. Tuggers have been used at…
Read More...

PRODUCT: KTM’s power valve can be adjusted by the power-valve adjuster located on the machine’s cylinder. In simple terms, the adjuster changes the preload on the main power-valve spring, allowing you to alter when the power valve opens,…
Read More...

BOLT IT ON TOY HAULER TIE-DOWN SYSTEM PRODUCT: Bolt It On is a manufacturer of tie-down systems for transporting motorcycles and bicycles securely in a van, toy hauler or trailer. The system can connect to your existing floor-mounted…
Read More...

PRODUCT: KTM, Husqvarna and GasGas “competition” models come stock with the XACT/AER48 air spring fork. Many riders who buy these bikes are unhappy with the feel of the air spring, especially in technical off-road terrain like roots or…
Read More...

PRODUCT: It’s no secret that a steering damper is essential to off-road racing in the west. High speeds and rough terrain play havoc with stability, and when you don’t have to use so much strength to hold the bike straight, it allows you to…
Read More...

The Klim Edge off-road goggles offer a maximum field of view with a fog-resistant lens and OTG cutouts to accommodate the riders who wear glasses. The ultra-HD lens achieves virtually perfect optical clarity. The multi-density frame helps…
Read More...

PRODUCT: The Bridgestone Battlecross E50R is an FIM-compatible rear enduro tire that is DOT legal. The E50R has improved traction and cornering grip while remaining FIM compliant. It features wide-spaced tread blocks that have increased…
Read More...

BULLETPROOF TPS GUARD The TPI bike’s TPS sensor is in a very vulnerable spot and prone to crash or trail-spear damage. If you wound the TPS in any way, there is a good chance your bike will not run and you may be stranded. Also, it will…
Read More...

PRODUCT: Fastback boots are a mid-level product from Gaerne, which would make them premium boots from many other makers. The Enduro is a new version that is tailored specifically for off-road riders. The primary difference is a more…
Read More...

S3 SLAVENS MULE HIGH-COMPRESSION HEAD The goal of the S3 head is to add performance, mainly bottom to mid-power. This is an area where the off-roader lives, making traction by having the ability to short-shift and lug his two-stroke when…
Read More...

PRODUCT: The new Leatt 4.5 Enduro boots are more budget-oriented but use many of the same features as the higher-end 5.5 FlexLock boots. Developed with help from Jonny Walker, the sole features a specific pattern and compound for assistance…
Read More...

COOBER ECU We are huge fans of TPI technology: no jetting required, no pre-mixed gas and oil, and, for the most part, clean and immediate power. But, if there’s one gripe, it is that the TPI versions do not make quite the same power as the…
Read More...

The FMF Titanium Powercore 2.1 Extreme silencer was developed for the hard enduro rider (i.e., Cody Webb, Graham Jarvis, and Colton Haaker). It has a very long titanium can, which has a larger diameter than the standard FMF silencers. The…
Read More...

PRODUCT: Engineered in Germany, the Xtrig preload adjuster is a mechanical replacement for the two rings used to make sag adjustments on your rear shock. The ingenious design uses a worm gear that travels the full length of the shock body…
Read More...

PRODUCT: Bullet Proof Designs’ KTM TPS sensor guard is a billet-aluminum guard that replaces the plastic OEM TPS (Throttle Position Sensor) cover on your fuel-injected KTM/Husqvarna/GasGas TPI two-stroke machines. It comes with new hardware…
Read More...

PRODUCT: Graphic protectors manufactured by Polisport are made with translucent plastic and are designed to help protect decals from peeling back when they come in contact with a rider’s boots. Each kit comes with all the hardware needed…
Read More...

PRODUCT: Coppersmith Racing Suspension, known for its Ohlins suspension setup, has an all-new suspension kit designed for the WP AER air fork. The Coppersmith-installed Ohlins Aero kit turns your stock WP AER or Xact air fork into a hybrid.…
Read More...

PRODUCT: Asterisk has been a top-of-the-line manufacturer of advanced knee braces for years.  The all-new Carbon Cell 1 was built to provide the finest quality, fitting and performance in a knee brace. It’s manufactured from military-spec…
Read More...