2004 HONDA CR250R OFF-ROAD PROJECT: TWO-STROKE TUESDAY

On this week’s Two-Stroke Tuesday we give you the first look at our 2004 Honda CR250R off-road build. New products from Vapor Honing Technologies, Bolt Motorcycle Hardware, and E-Line Accessories are featured in the 2-Stroke Hardware section and 2-Stroke Theater is packed with four premix burning machines you don’t want to miss. Kawasaki two-stroke lovers don’t miss the exclusive link to our 2004 KX250 off-road project at the bottom of this post.

 

This Honda CR250 two-stroke project was set up for the trails. It wasn’t a complete rebuild but it was given tons of TLC and a lot of bolt-on items as you can see.

The P3 Carbon pipe guard offers protection for the FMF pipe and the Cycra skid plate is originally for 2009-15 KX450. It does require a substantial amount of modification and does not bolt right up.

An oversized IMS tank is a necessity for any trail bike build. The more gas you have the more fun you can have!

Specbolt Nickel Würks bolt kits are popping up everywhere! This engine also has a Hinson complete clutch, VForce reed cage, CV4 radiator hoses and a new Vertex top-end. 

TM Designworks and Supersprox Stealth sprocket are a tough combination and great for handling off-road abuse.

This build is what we think every two-stroke build will be but almost never is. New top-end with some Tom Morgan cylinder porting and lets go ride. Wish they all were that easy!

Don’t worry this is just the first time you will see this machine! We have a lot more plans for it. Stay tuned to the website for more in the upcoming weeks 

2-STROKE HARDWARE

E-LINE CARBON FIBER

The SH1 Registration Wrap from E-Line features a universal design to fit on all forks after the year 2000. This carbon fiber wrap that can be installed without requiring tools. It can also protect registration stickers already installed by positioning it over the sticker on the fork tube.
Contact: www.elineaccessories.com

VAPOR HONING TECHNOLOGIES VH8OOFL

The VH800FL is an entry level wet-blasting machine built with the smaller restoration shops or weekend warrior in mind. Featuring a closed loop filtration system, durable alloy construction, Boron Carbide Tip blast gun and holds 20 gallons of water and abrasive at all times.
Contact: www.vaporhoningtechnologies.com

BOLT MOTORCYCLE HARDWARE

Bolt Motorcycle Hardware makes a universal metric hardware assortment for Japanese off-road motorcycle applications. Each kit contains the most commonly replaced steel hardware and a full set of sprocket bolts. All hardware meets or exceeds factory specs.
Contact: www.boltmotorcyclehardware.com

 

2-STROKE THEATER

If you like the 2004 CR250R off-road build featured on this week’s Two-Stroke Tuesday check out this 2004 Kawasaki KX250 off-road build. Just click the image below for the full story.

 

Comments are closed.